Online Webinars

Webinars for Expanding Knowledge

In its continuing education and technology transfer efforts, NADCA has made available a number of webinars to provide additional opportunities for individuals to obtain information. These hour long presentations typically run every week and cover topics such as Safety, Results of Surveys and Studies, Various Processes, Economic Industry Data, Energy Conservation Efforts, NADCA R&D Research Results and New Technologies.

Attending a webinar is an excellent way to obtain vital information without the hassle or cost of travel. As an additional cost saving option we suggest purchasing one webinar login and gathering employees to view the presentation via projector! A webinar presentation will not only address important information on the topic but also provide adequate time for questions, answers, and discussion.

For more information please contact Athena Catlett at 847.808.3153.

Live Webinars

Date	Webinar	Time	Corporate	Non-Corporate
May 21	Operator Training: Everybody Is Involved in Die Setup	2:00 pm CDT	$99.00	$99.00
May 22	Other Finishing Processes	12:00 pm CDT	$39.00	$89.00
May 22	Operator Training: Proper Care and Treatment of Dies During Production	2:00 pm CDT	$99.00	$99.00
May 23	OSHA-Machine Guarding	12:00 pm CDT	$39.00	$89.00
May 28	Operator Training: Recognizing and Controlling Flow Defects	2:00 pm CDT	$99.00	$99.00
May 29	The New HF (High Fluidity) Zinc Alloy: Extending zinc’s alloying capabilities and improving energy efficiency	12:00 pm CDT	$39.00	$89.00
May 29	Operator Training: Recognizing and Controlling Porosity	2:00 pm CDT	$99.00	$99.00
May 30	I-9 Form – Completion, Verification and Requirement to Avoid Penalties	12:00 pm CDT	$39.00	$89.00
June 4	Operator Training: Eliminating Solder and Flash Defects	2:00 pm CDT	$99.00	$99.00
June 5	Design Considerations for 3 Plate Casting Die	12:00 pm CDT	$39.00	$89.00
June 12	The Vent	12:00 pm CDT	$39.00	$89.00
June 19	Cleaning Techniques Used for Die Casting Dies	12:00 pm CDT	$39.00	$89.00
June 26	Slide Design Considerations	12:00 pm CDT	$39.00	$89.00
July 17	Understanding Mechanical Property Variations in Die Castings	12:00 pm CDT	$39.00	$89.00
July 31	Reduce Die Soldering in Die Casting	12:00 pm CDT	$39.00	$89.00
August 7	Visual inspection	12:00 pm CDT	$39.00	$89.00
August 14	Why Dies Fail and How to Prevent Failures?	12:00 pm CDT	$39.00	$89.00
August 21	The Effect of Softening, Residual Stresses and Stress Concentration Factors on Die Life	12:00 pm CDT	$39.00	$89.00
August 28	Repair of Dies	12:00 pm CDT	$39.00	$89.00
September 4	Understanding Porosity	12:00 pm CDT	$39.00	$89.00
September 5	OSHA: When OSHA Knocks	12:00 pm CDT	$39.00	$89.00
September 11	Casting Design	12:00 pm CDT	$39.00	$89.00
September 25	Die Design	12:00 pm CDT	$39.00	$89.00
September 26	OSHA: Post-Citation Strategies	12:00 pm CDT	$29.00	$79.00
October 2	Process Control	12:00 pm CDT	$39.00	$89.00
October 3	OSHA: Guidelines for Preparing an Incident Investigation Report	12:00 pm CDT	$29.00	$79.00
October 9	Rapid Tooling	12:00 pm CDT	$39.00	$89.00
October 10	OSHA Dust Safety	12:00 pm CDT	$29.00	$79.00
October 23	State of the Industry 2013 - 6 Month Review	12:00 pm CDT	$39.00	$89.00
October 30	Wash-out & Cavitation	12:00 pm CDT	$39.00	$89.00
November 6	Soluble Cores	12:00 pm CDT	$39.00	$89.00
November 13	Die Preparation Before Heat Treat	12:00 pm CDT	$39.00	$89.00
November 20	H.T. Die Castings	12:00 pm CDT	$39.00	$89.00
December 4	Die Spray	12:00 pm CDT	$39.00	$89.00
December 11	Thermal Lines	12:00 pm CDT	$39.00	$89.00
December 18	Optimizing Die Casting with PQ2	12:00 pm CDT	$39.00	$89.00