Cost: $800

Total Hours
89

Tool Design Job Function Kit

DescriptionHoursLanugage
Bi-Metallic Tooling1English
Extreme Thin Wall Casting1English
Die Spray1English
Thermal Lines1English
The Quality of Steel1English
Influence of Process Parameters and Maintenance on Die Life1English
Applying New Technologies to Die Repair1English
Safe Reliable Die Clamping1English
Cleaning Techniques Used for Die Casting Dies1English
Design Considerations for 3 Plate Casting Die1English
The Vent1English
Slide Design Considerations1English
Cooling Line Placement in New Die Steels1English
Short Run Tooling for Die Castings1English
Porosity Basics: Introduction to the Causes of Porosity (Series Part 1 of 4)1English
Porosity Basics: Control Porosity with Processing Parameters (Series Part 2 of 4)1English
Porosity Basics: Design for Reduced Porosity (Series Part 3 of 4)1English
Porosity Basics: Predicting and Measuring Porosity (Series Part 4 of 4)1English
Modeling: Die Casting Modeling Capabilities (Series Part 1 of 3)1English
Modeling: FEA and FVA - The Different Modeling Approaches (Series Part 2 of 3)1English
Modeling: State of the Art Die Casting Modeling Practices (Series Part 3 of 3)1English
Surface Treatment and Coating Technology Used in Die Casting1English
Salts Cores and Their Use in High Pressure Die Casting1English
Porosity Management: Understanding Porosity (Series Part 1 of 4)1English
Porosity Management: Casting Design (Series Part 2 of 4)1English
Porosity Management: Die Design (Series Part 3 of 4)1English
Porosity Management: Process Control (Series Part 4 of 4)1English
Understanding Mechanical Property Variations in Die Castings1English
Shot Sleeve Washout in Die Casting1English
Shot Tips for Cold Chamber Die Casting1English
Elimination of Shot Sleeve Distortion1English
Die Design: Dimensional Control Theory (Series Part 1 of 18)1English
Die Design: Dimensional Control Example (Series Part 2 of 18)1English
Die Design: Thermal Design Theory (Series Part 5 of 18)1English
Die Design: Thermal Design Example (Series Part 7 of 18)1English
Die Design: Thermal Control (Series Part 9 of 18)1English
Die Design: Basic Die Casting Die - Holders and Locking (Series Part 10 of 18)1English
Die Design: Basic Die Casting Die - Inserts and Fit (Series Part 11 of 18)1English
Die Design: Moving Cores (Series Part 12 of 18)1English
Die Design: Ejection (Series Part 13 of 18)1English
Die Design: Thermal Design Theory 2 (Series Part 6 of 18)1English
Die Design: Thermal Design Example 2 (Series Part 8 of 18)1English
Die Lubricants: Selection, Use and Evaluation1English
Problem Solving: Basic Statistics and Problem Solving Methods (Series Part 1 of 2)1English
Problem Solving: Experimental Design Basics and Examples (Series Part 2 of 2)1English
Zinc Die Casting: Processes and Tooling (Series Part 2 of 2)1English
Rapid Die Change: SMED Motivation and Concept (Series Part 1 of 3)1English
Rapid Die Change: SMED the Systematic Approach (Series Part 2 of 3)1English
Rapid Die Change: SMED Analyzing and Improving (Series Part 3 of 3)1English
Introduction to Die Casting: Die Casting Introduction1English
Introduction to Die Casting:Die Casting Machines & Dies1English
Introduction to Die Casting:Die Casting Alloys & Fundamental1English
Applications of Additive Manufacturing in Die Casting1English
Gating/PQ2: Introduction and Basic Principles1English
Gating/PQ2: PQ2,the Operating Window, Machine Constraints1English
Gating & PQ2: Calculations1English
Gating & PQ2: Designing Runners, Overflows and Vents1English
Conformal Cooling and other Applications of Additive Manufacturing in Die Casting1English
Predicting Castability of Ultra-Thin Parts Using Simulations1English
Production and Inspection of Zinc Die Castings of Platable..1English
Safety: Basic Safety in Die Casting1English
Safety: Machine Maintenance Safety in Die Casting1English
Safety: Electrical Safety in Die Casting1English
Safety: Managing Safety in Die Casting1English
Die Preparation Before Heat Treat1English
Trimming & Vibratory Processes1English
Flash Free Die Casting1English
Die Design: Processing Aides (Series Part 14 of 18)1English
Die Design: Shot End Monitoring (Series Part 15 of 18)1English
Gating: Fan Gates1English
Gating: Tangential Gates1English
Heat Treatment of Steel1English
New Die Steels and Surface Treatments1English
Engineering Die Casting Dies:Dimensional Repeatability1English
Engineering Dies:Gating/Process Planning-Simplified Approach1English
Engineering Dies:Gating/Process Planning-Designing Runner1English
Engineering Die:Gating/Process-NADCA Approach to Gating1English
Engineering Dies:Thermal Design - Why Bother1English
Engineering Dies:Thermal Design - Simplified Approach1English
Engineering Dies:Thermal Design-NADCA Approach1English
Engineering Die Casting Dies: Designing the Die1English
Engineering Die Casting Dies:Moving Cores1English
Engineering Die Casting Dies:Ejection Systems1English
Simplified Approach to Designing Cooling of Dies1English
Intermediate Approach to Designing Cooling of Dies1English
Advanced Approach to Designing Cooling of Dies1English
Die Casting Defects Part 1 - Spanish1Spanish
Die Casting Defects Part 2 - Spanish1Spanish
Die Casting Defects Part 3 - Spanish1Spanish

Ask NADCA

Beau Glim 847.808.3164
Project Manager
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager
 
Melisa Ryzner 847.808.3161
Education & Meetings Manager  
Donna Hutchins
Donna Hutchins
847.808.3154
Membership Services
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Melisa Ryzner 847.808.3161
Education & Meetings Manager
 
Paul Brancaleon 847.808.3160
Director of Research, Education and Technology
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager