Cost: $800

Total Hours
40

Die Care and Maintenance Job Function Kit

DescriptionHoursLanguage
Basic Operator Training: Die Components and Their Functions1English
Basic Operator Training: Proper Care and Treatment of Dies During1English
Advanced Operator Training: Understanding Die Steel and What Makes Dies Last1English
Die Spray1English
Thermal Lines1English
The Quality of Steel1English
Influence of Process Parameters and Maintenance on Die Life1English
Applying New Technologies to Die Repair1English
Why Dies Fail and How to Prevent Failures?1English
The Effect of Softening, Residual Stresses and Stress Concen1English
Repair of Dies1English
Safe Reliable Die Clamping1English
Cleaning Techniques Used for Die Casting Dies1English
Die Preparation Before Heat Treat1English
Reduce Die Soldering in Die Casting1English
Flash Free Die Casting1English
Die Design: Thermal Design Theory (Series Part 5 of 18)1English
Die Design: Thermal Design Example (Series Part 7 of 18)1English
Die Design: Thermal Control (Series Part 9 of 18)1English
Die Design: Thermal Design Theory 2 (Series Part 6 of 18)1English
Die Design: Thermal Design Example 2 (Series Part 8 of 18)1English
Introduction to Die Casting: Die Casting Introduction1English
Introduction to Die Casting:Die Casting Machines & Dies1English
Introduction to Die Casting:Die Casting Alloys & Fundamental1English
Safety: Basic Safety in Die Casting1English
Safety: Machine Maintenance Safety in Die Casting1English
Safety: Electrical Safety in Die Casting1English
Safety: Managing Safety in Die Casting1English
Shot Sleeve Washout in Die Casting1English
Shot Tips for Cold Chamber Die Casting1English
Elimination of Shot Sleeve Distortion1English
Rapid Die Change: SMED Motivation and Concept (Series Part 1 of 3)1English
Rapid Die Change: SMED the Systematic Approach (Series Part 2 of 3)1English
Rapid Die Change: SMED Analyzing and Improving (Series Part 3 of 3)1English
Applications of Additive Manufacturing in Die Casting1English
Conformal Cooling and other Applications of Additive Manufacturing in Die Casting1English
Applied Coatings and Die Maintenance1English
Parting Surface Geometry & Fitting Cavity Block1English
Fitting & Locking Slides1English
Spanish Operator Training: Everybody Is Involved in Die Setup1Spanish

Ask NADCA

Beau Glim 847.808.3164
Project Manager
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager
 
Melisa Ryzner 847.808.3161
Education & Meetings Manager  
Donna Hutchins
Donna Hutchins
847.808.3154
Membership Services
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Melisa Ryzner 847.808.3161
Education & Meetings Manager
 
Paul Brancaleon 847.808.3160
Director of Research, Education and Technology
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager