Porosity Problems? Learn to Predict, Measure, Control and Reduce Porosity

NADCA surveyed designers and purchasers about the advantages and problems with die cast components. The companies that used die cast products were asked to identify some of the common problems they encounter with die castings. More than one in three specifically identified `Porosity’ as a common problem.

Since porosity is a common concern among die casters NADCA created a series of webinars focusing on the various aspects of porosity. Each presentation will not only address important information on the topic but also provide time for questions, answers, and discussion.

Part 1: An Introduction to the Causes of Porosity - This webinar will cover the causes of porosity. In particular the sources of shrink porosity and gas porosity will be explained. It will conclude with traditional concepts for reducing porosity formation. 
Date: March 3, 2020
 
Part 2: Control Porosity with Processing Parameters - Many die casting process variables affect the final porosity level in a casting. This webinar will discuss the effect of these different parameters on porosity. It will connect these processing parameters back to the underlying porosity formation mechanisms. 
Date: March 5, 2020

Part 3: Design for Reduced Porosity - Part design is the number one factor affecting the final porosity in a casting. This is due to the physical sources of porosity. This webinar will explain casting and tooling design choices that can be used to control porosity. 
Date: March 10, 2020

Part 4: Predicting and Measuring Porosity - Achieve reduced porosity through adequate measurement and prediction. This webinar will discuss different ways to predict porosity. In addition it will explain some basics of digital porosity measurement. Any successful porosity reduction program must include porosity prediction and measurement. 
Date: March 11, 2020

Purchase the Webinar Series 

Purchase a Single Webinar
Part 1 - An Introduction to the Causes of Porosity 
Part 2 - Control Porosity with Processing Parameters 
Part 3 - Design for Reduced Porosity 
Part 4 - Predicting and Measuring Porosity
 
These webinars will take place at 12pm CST on the dates listed. The cost per webinar is $69 for Corporate Members, $99 for Individual Members or $119 for Non-Corporate Members. Please note that registering for a webinar grants you access to the live broadcast on the given date. No recordings or pdfs of the presentation will be issued.
 

Ask NADCA

Beau Glim 847.808.3164
Project Manager
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager
 
Melisa Ryzner 847.808.3161
Education & Meetings Manager  
Stephen Udvardy
Stephen Udvardy
847.808.3163
President
Andy Ryzner
 
Andy Ryzner
847.808.3165
Editor
Melisa Ryzner 847.808.3161
Education & Meetings Manager
 
Paul Brancaleon 847.808.3160
Director of Research, Education and Technology
Athena Catlett
 
Athena Catlett
847.808.3153
Advertising & Promotions Manager