Education & Training Webinars
In its continuing education and technology transfer efforts, NADCA has made available a number of webinars to provide additional opportunities for individuals to obtain information. These hour long presentations typically run every week and cover topics such as Safety, Results of Surveys and Studies, Various Processes, Economic Industry Data, Energy Conservation Efforts, NADCA R&D Research Results and New Technologies.
Attending a webinar is an excellent way to obtain vital information without the hassle or cost of travel. As an additional cost saving option we suggest purchasing one webinar login and gathering employees to view the presentation via projector! A webinar presentation will not only address important information on the topic but also provide adequate time for questions, answers, and discussion.
How To Make Die Casting Tooling Last Longer
- The Quality of Steel
- Influence of Process Parameters and Maintenance on Die Life
- Applying New Technologies
Shot Profiles Engineered for Success
State of the Industry
Inclusion Control
Porosity
- Introduction to the Causes of Porosity
- Control Porosity with Processing Parameters
- Design for Reduced Porosity
- Predicting and Measuring Porosity
How to Size a Machine to Your Part
Thermally Controlling the Die for High Quality Parts
Die Casting Coatings for Longer Lasting Components
Finishing Operations for Die Castings: Trimming, Blasting, Vibratory Finishing, Shot Peening and Other Techniques
Advanced Casting Die Design
OSHA
- When OSHA Knocks
- Post-Citation Strategies
- Guidelines for Preparing an Incident Investigation Report
- Common Citations and How to Avoid Them
- Controlling Noise in a Die Cast Shop
- OSHA Dust Safety
- OSHA Machine Guarding
Operator Training
- Operator Training: Die Casting Machine Components & the Die Casting Cycle
- Operator Training: Die Components & Their Functions
- Operator Training: Eliminating Solder and Flash Defects
- Operator Training: Everybody Is Involved in Die Setup
- Operator Training: How it Works - The Shot End
- Operator Training: Introduction to Die Casting & Safety on the Shop Floor
- Operator Training: Proper Care and Treatment of Dies During Production
- Operator Training: Recognizing and Controlling Flow Defects
- Operator Training: Recognizing and Controlling Porosity
- Operator Training: Understanding Metal Melting/Handling for Operators
- Operator Training: Why Shot Monitors are Important
Individual Webinars
- Bi-Metallic Tooling
- Cooling Line Placement in New Die Steels
- Personal Protective Equipment
- Short Run Tooling for Die Castings
- Safe Reliable Die Clamping
- Introduction to Arc Flash
- Reduce Die Soldering in Die Casting
- Extreme Thin Wall Casting
- Eliminating Flash Defects in Die Castings
- Elimination of Shot Sleeve Distortion
- Energy
- Structural Die Casting
- Achieving Exceptional As-Cast Surface Finish
- DOT Requirements for Dross Shipment
- Combustible Dust
- Optimizing Die Casting with PQ2
- Understanding Mechanical Property Variations in Die Castings
- Heat Flow Outside the DCM
- The Impact of Externally Solidified Product (ESP)
- Multi-layer and Smart Coating Systems
Your Cart